$Id: foo2qpdl.c,v 1.54 2014/01/27 02:23:29 rick Exp $

foo2qpdl: invalid option -- '-' Usage: foo2qpdl [options] <pbmraw-file >qpdl-file Convert Ghostscript pbmraw format to a monochrome ZJS stream, for driving the HP LaserJet M1005 MFP laser printer. gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE \ -sPAPERSIZE=letter -r1200x600 -sDEVICE=pbmraw \ -sOutputFile=- - < testpage.ps \ | foo2qpdl -r1200x600 -g10200x6600 -p1 >testpage.zm foo2qpdl [options] <bitcmyk-file >qpdl-file foo2qpdl [options] <pksmraw-file >qpdl-file Convert Ghostscript bitcmyk or pksmraw format to a color ZJS stream, for driving the HP LaserJet M1005 MFP color laser printer N.B. Color correction is expected to be performed by ghostscript. gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE \ -sPAPERSIZE=letter -g10200x6600 -r1200x600 -sDEVICE=bitcmyk \ -sOutputFile=- - < testpage.ps \ | foo2qpdl -r1200x600 -g10200x6600 -p1 >testpage.zc Normal Options: -c Force color mode if autodetect doesn't work -d duplex Duplex code to send to printer [1] 1=off, 2=longedge, 3=shortedge -g <xpix>x<ypix> Set page dimensions in pixels [10200x6600] -m media Media code to send to printer [0] 0=plain, 1=thick, 2=thin. 3=bond, 4=color, 5=card, 6=labels, 7=envelope, 8=preprinted, 9=cotton, 10=recycled, 11=transparency, 12=archive -p paper Paper code [0] 0=letter, 1=legal, A4=2, 3=executive, 6=env#10, 7=envMonarch, 8=envC5, 9=envDL, 11=B5jis, 12=B5iso, 16=A5, 17=A6, 21=custom, 23=envC6, 24=folio, 25=env6.75, 26=env#9, 28=oficio -n copies Number of copies [1] -r <xres>x<yres> Set device resolution in pixels/inch [1200x600] -s source Source code to send to printer [1] 1=upper 2=lower 4=manual 7=auto Code numbers may vary with printer model -t Draft mode. Every other pixel is white. -J filename Filename string to send to printer [] -U username Username string to send to printer [] Printer Tweaking Options: -a b,c,s,cr,mg,yb Color Adjust from 0 to 100 [50,50,50,50,50,50] -u <xoff>x<yoff> Set offset of upper left printable in pixels [0x0] -l <xoff>x<yoff> Set offset of lower right printable in pixels [0x0] -L mask Send logical clipping values from -u/-l in ZjStream [3] 0=no, 1=Y, 2=X, 3=XY -A AllIsBlack: convert C=1,M=1,Y=1 to just K=1 -B BlackClears: K=1 forces C,M,Y to 0 -A, -B work with bitcmyk input only -P Do not output START_PLANE codes. May be needed by some some black and white only printers. -X padlen Add extra zero padding to the end of BID segments [16] -z model Model [0] 0=CLP-300, CLX-2160, CLX-3160 1=CLP-600 2=CLP-310/315, CLP-320/325, CLP-610, CLX-3175 3=CLP-360/365, CLP-620 Debugging Options: -S plane Output just a single color plane from a color print [all] 1=Cyan, 2=Magenta, 3=Yellow, 4=Black -D lvl Set Debug level [0] -V Version $Id: foo2qpdl.c,v 1.54 2014/01/27 02:23:29 rick Exp $