$Id: foo2hbpl2.c,v 1.34 2015/10/11 19:24:50 rick Exp $

foo2hbpl2: invalid option -- '-' Usage: foo2hbpl2 [options] <pbmraw-file >hbpl-file Convert Ghostscript pbmraw format to a monochrome ZJS stream, for driving the Dell 1355 and Xerox WorkCentre 6015 MFP printers. gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE \ -sPAPERSIZE=letter -r1200x600 -sDEVICE=pbmraw \ -sOutputFile=- - < testpage.ps \ | foo2hbpl2 -r1200x600 -g10200x6600 -p1 >testpage.zm foo2hbpl2 [options] <bitcmyk-file >hbpl-file foo2hbpl2 [options] <pksmraw-file >hbpl-file Convert Ghostscript bitcmyk or pksmraw format to a color ZJS stream, for driving Dell 1355 and Xerox WorkCentre 6015 MFP printers. N.B. Color correction is expected to be performed by ghostscript. gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE \ -sPAPERSIZE=letter -g10200x6600 -r1200x600 -sDEVICE=bitcmyk \ -sOutputFile=- - < testpage.ps \ | foo2hbpl2 -r1200x600 -g10200x6600 -p1 >testpage.zc Normal Options: -c Force color mode if autodetect doesn't work -d duplex Duplex code to send to printer [1] 1=off, 2=longedge, 3=shortedge 4=manual longedge, 5=manual shortedge -g <xpix>x<ypix> Set page dimensions in pixels [10200x6600] -m media Media code to send to printer [1] 1=plain, 2=bond, 3=lwcard, 4=lwgcard, 5=labels, 6=envelope, 7=recycled, 8=plain2, 9=bond2, 10=lwcard2, 11=lwgcard2, 12=recycled2 -p paper Paper code to send to printer [4] 1=A4, 2=B5, 3=A5, 4=letter, 5=executive, 6=fanfoldgermanlegal/folio, 7=legal, 9=env#10, 10=envMonarch, 11=envC5, 12=envDL -n copies Number of copies [1] -r <xres>x<yres> Set device resolution in pixels/inch [1200x600] -s source Source code to send to printer [7] 1=upper 2=lower 4=manual 7=auto Code numbers may vary with printer model -t Draft mode. Every other pixel is white. -J filename Filename string to send to printer [] -U username Username string to send to printer [] Printer Tweaking Options: -u <xoff>x<yoff> Set offset of upper left printable in pixels [0x0] -l <xoff>x<yoff> Set offset of lower right printable in pixels [0x0] -L mask Send logical clipping values from -u/-l in ZjStream [3] 0=no, 1=Y, 2=X, 3=XY -A AllIsBlack: convert C=1,M=1,Y=1 to just K=1 -B BlackClears: K=1 forces C,M,Y to 0 -A, -B work with bitcmyk input only -P Do not output START_PLANE codes. May be needed by some some black and white only printers. -X padlen Add extra zero padding to the end of BID segments [16] Debugging Options: -S plane Output just a single color plane from a color print [all] 1=Cyan, 2=Magenta, 3=Yellow, 4=Black -D lvl Set Debug level [0] -V Version $Id: foo2hbpl2.c,v 1.34 2015/10/11 19:24:50 rick Exp $