Linux Frame Buffer Device Configuration Version 2.1 (23/06/1999) (C) Copyright 1995-1999 by Geert Uytterhoeven mode "800x600" geometry 800 600 800 600 32 timings 0 0 0 0 0 0 0 accel true rgba 8/16,8/8,8/0,0/0 endmode

Linux Frame Buffer Device Configuration Version 2.1 (23/06/1999) (C) Copyright 1995-1999 by Geert Uytterhoeven Usage: fbset [options] [mode] Valid options: General options: -h, --help : display this usage information --test : don't change, just test whether the mode is valid -s, --show : display video mode settings -i, --info : display all frame buffer information -v, --verbose : verbose mode -V, --version : print version information -x, --xfree86 : XFree86 compatibility mode -a, --all : change all virtual consoles on this device Frame buffer special device nodes: -fb <device> : processed frame buffer device (default is /dev/fb0) Video mode database: -db <file> : video mode database file (default is /etc/fb.modes) Display geometry: -xres <value> : horizontal resolution (in pixels) -yres <value> : vertical resolution (in pixels) -vxres <value> : virtual horizontal resolution (in pixels) -vyres <value> : virtual vertical resolution (in pixels) -depth <value> : display depth (in bits per pixel) -nonstd <value> : select nonstandard video mode -g, --geometry ... : set all geometry parameters at once -match : set virtual vertical resolution by virtual resolution Display timings: -pixclock <value> : pixel clock (in picoseconds) -left <value> : left margin (in pixels) -right <value> : right margin (in pixels) -upper <value> : upper margin (in pixel lines) -lower <value> : lower margin (in pixel lines) -hslen <value> : horizontal sync length (in pixels) -vslen <value> : vertical sync length (in pixel lines) -t, --timings ... : set all timing parameters at once Display flags: -accel <value> : hardware text acceleration enable (false or true) -hsync <value> : horizontal sync polarity (low or high) -vsync <value> : vertical sync polarity (low or high) -csync <value> : composite sync polarity (low or high) -gsync <value> : synch on green (false or true) -extsync <value> : external sync enable (false or true) -sync <value> : custom (driver specific) sync value -bcast <value> : broadcast enable (false or true) -laced <value> : interlace enable (false or true) -double <value> : doublescan enable (false or true) -rgba <r,g,b,a> : recommended length of color entries -grayscale <value> : grayscale enable (false or true) Display positioning: -move <direction> : move the visible part (left, right, up or down) -step <value> : step increment (in pixels or pixel lines) (default is 8 horizontal, 2 vertical)