dvbsnoop - a dvb/mpeg2 stream analyzer tool Version: 1.4.50/api-3 (Jun 11 2013 22:46:34) http://dvbsnoop.sourceforge.net/ (c) 2001-2007 Rainer Scherg (rasc) Usage: dvbsnoop [opts] pid Options: -s type: snoop type or mode <type> [-s sec] stream type: sec, pes, ps or ts or special scan type: pidscan = transponder pid scan, bandwidth = data rate statistics for pid signal = signal rate statistics feinfo = frontend information stream type or pidscan -demux device: demux device [/dev/dvb/adapter0/demux0] -dvr device: dvr device [/dev/dvb/adapter0/dvr0] -frontend device: frontend device [/dev/dvb/adapter0/frontend0] -adapter n: select dvb adapter/card no. <n> using default path -devnr n: select device no. <n> using default dvb adapter/card -if file: input file, reads from binary <file> instead of demux device <file>="-" = /dev/stdin -timeout ms: section/signal read timeout in <ms> msec. [-timeout 0] -maxdmx n: max demux filters <n> to use in pidscan mode (0=max) [-maxdmx 0] -buffersize kb: read buffersize in KBytes [-buffersize 0] (0 = use default read buffer size) -f filter: filtervalue for 'sec' demux [-f 0] multibyte filter syntax: 0x1A.34.56.7F.01 -m mask: maskvalue for 'sec' demux [-m 0] multibyte mask syntax: 0x1A.00.F6.55 -crc: CRC check when reading 'sec' [-nocrc] -nocrc: no CRC check when reading 'sec' [-nocrc] -softcrc: internal soft CRC check when reading 'sec' [-nosoftcrc] -nosoftcrc: no internal soft CRC check when reading 'sec' [-nosoftcrc] -sync: simple packet header sync when reading 'ts' or 'pes' [-snyc] -nosync: (obsolete option) -n count: receive/read max. <count> packets (0=no limit) [-n 0] -N count: decode max. <count> packets (0=no limit) [-N 0] this will limit -n, e.g. when using soft filters. -spiderpid: snoop referenced section pids (sets -n 1) -tssubdecode: sub-decode sections or pes from ts stream decoding -tsraw: read raw/full TS in TS snoop mode -b: binary output of packets (disables other output) -ph mode: data hex dump mode, modes: [-ph 4] 0=none, 1=hexdump, 2=hex line 3=ascii line 4=hexdump2 -hexdumpbuffer: print hex dump of read buffer [-hexdumpbuffer] -nohexdumpbuffer: don't print hex dump of read buffer [-hexdumpbuffer] -nph: don't print hex dump of buffer [= -nohexdumpbuffer] -pd verbose: print stream decode (verbose level 0..9) [-pd 7] -npd: don't print decoded stream (= -pd 0) -t[n|d|f]: print timestamp (no, delta, full) [-tf] -privateprovider id: set provider <id> string for decoding private tables and descriptors -hideproginfo: hide copyright and program info header at program start -help: this usage info... Known private providers for private sections and descriptors: premiere.de

dvbsnoop - a dvb/mpeg2 stream analyzer tool Version: 1.4.50/api-3 (Jun 11 2013 22:46:34) http://dvbsnoop.sourceforge.net/ (c) 2001-2007 Rainer Scherg (rasc) Usage: dvbsnoop [opts] pid Options: -s type: snoop type or mode <type> [-s sec] stream type: sec, pes, ps or ts or special scan type: pidscan = transponder pid scan, bandwidth = data rate statistics for pid signal = signal rate statistics feinfo = frontend information stream type or pidscan -demux device: demux device [/dev/dvb/adapter0/demux0] -dvr device: dvr device [/dev/dvb/adapter0/dvr0] -frontend device: frontend device [/dev/dvb/adapter0/frontend0] -adapter n: select dvb adapter/card no. <n> using default path -devnr n: select device no. <n> using default dvb adapter/card -if file: input file, reads from binary <file> instead of demux device <file>="-" = /dev/stdin -timeout ms: section/signal read timeout in <ms> msec. [-timeout 0] -maxdmx n: max demux filters <n> to use in pidscan mode (0=max) [-maxdmx 0] -buffersize kb: read buffersize in KBytes [-buffersize 0] (0 = use default read buffer size) -f filter: filtervalue for 'sec' demux [-f 0] multibyte filter syntax: 0x1A.34.56.7F.01 -m mask: maskvalue for 'sec' demux [-m 0] multibyte mask syntax: 0x1A.00.F6.55 -crc: CRC check when reading 'sec' [-nocrc] -nocrc: no CRC check when reading 'sec' [-nocrc] -softcrc: internal soft CRC check when reading 'sec' [-nosoftcrc] -nosoftcrc: no internal soft CRC check when reading 'sec' [-nosoftcrc] -sync: simple packet header sync when reading 'ts' or 'pes' [-snyc] -nosync: (obsolete option) -n count: receive/read max. <count> packets (0=no limit) [-n 0] -N count: decode max. <count> packets (0=no limit) [-N 0] this will limit -n, e.g. when using soft filters. -spiderpid: snoop referenced section pids (sets -n 1) -tssubdecode: sub-decode sections or pes from ts stream decoding -tsraw: read raw/full TS in TS snoop mode -b: binary output of packets (disables other output) -ph mode: data hex dump mode, modes: [-ph 4] 0=none, 1=hexdump, 2=hex line 3=ascii line 4=hexdump2 -hexdumpbuffer: print hex dump of read buffer [-hexdumpbuffer] -nohexdumpbuffer: don't print hex dump of read buffer [-hexdumpbuffer] -nph: don't print hex dump of buffer [= -nohexdumpbuffer] -pd verbose: print stream decode (verbose level 0..9) [-pd 7] -npd: don't print decoded stream (= -pd 0) -t[n|d|f]: print timestamp (no, delta, full) [-tf] -privateprovider id: set provider <id> string for decoding private tables and descriptors -hideproginfo: hide copyright and program info header at program start -help: this usage info... Known private providers for private sections and descriptors: premiere.de