2.3.1

Usage: smbios-wireless-ctl Options: --version show program's version number and exit -h, --help show this help message and exit --info Show wireless configuration (default) --boot Set BIOS boot-time setting. --no-boot Do not set BIOS boot-time setting. --runtime Set BIOS runtime setting (default). --no-runtime, --boot-only, --boot_only Do not set BIOS runtime setting. --wlan=WLAN Set radio runtime status for wireless LAN --bt=BT Set radio runtime status for Bluetooth --wwan=WWAN Set radio runtime status for cellular (wireless WAN) --uwb=UWB Set radio runtime status for UWB --wigig=WIGIG Set radio runtime status for WiGig --sw_wlan=SW_WLAN Set hardware switch so that it controls radio for wireless LAN --sw_bt=SW_BT Set hardware switch so that it controls radio for Bluetooth --sw_wwan=SW_WWAN Set hardware switch so that it controls radio for cellular (wireless WAN) --sw_uwb=SW_UWB Set hardware switch so that it controls radio for UWB --sw_wigig=SW_WIGIG Set hardware switch so that it controls radio for WiGig --sw_locator=SW_LOCATOR Enable or disable the WIFI locator switch --st_wlan Get status for wireless LAN. 0 = enabled. 1 = disabled. 2 = not present. 3 = unsupported. 4 = unknown. --st_bt Get status for Bluetooth. 0 = enabled. 1 = disabled. 2 = not present. 3 = unsupported. 4 = unknown. --st_wwan Get status for cellular (wireless WAN). 0 = enabled. 1 = disabled. 2 = not present. 3 = unsupported. 4 = unknown. --st_uwb Get status for UWB. 0 = enabled. 1 = disabled. 2 = not present. 3 = unsupported. 4 = unknown. --st_wigig Get status for WiGig. 0 = enabled. 1 = disabled. 2 = not present. 3 = unsupported. 4 = unknown. --st_locator=ST_LOCATOR Get status for locator switch -v, --verbose Display more verbose output. -q, --quiet Minimize program output. Only errors and warnings are displayed. --trace Enable verbose function tracing. --logconfig=LOGCONFIG Specify alternate config log. --security-key=SECURITY_KEY BIOS pre-calculated security key. --password=PASSWORD BIOS Setup password for set/activate operations. -r, --rawpassword Do not auto-convert password to scancodes. --memory-dat=MEMORY_DAT Path to a memory dump file to use instead of real RAM --cmos-dat=CMOS_DAT Path to a CMOS dump file to use instead of real CMOS