colprof -V (return code: 1)
Create ICC profile, Version 1.8.3
Author: Graeme W. Gill, licensed under the AGPL Version 3
Diagnostic: Missing input .ti3 and output ICC basename
usage: colprof [-options] inoutfile
-v Verbose mode
-A manufacturer Manufacturer description string
-M model Model description string
-D description Profile Description string (Default "inoutfile")
-C copyright Copyright string
-Z tmnb Attributes: Transparency, Matte, Negative, BlackAndWhite
-Z prsa Default intent: Perceptual, Rel. Colorimetric, Saturation, Abs. Colorimetric
-q lmhu Quality - Low, Medium (def), High, Ultra
-b [lmhun] Low quality B2A table - or specific B2A quality or none for input device
-ni Don't create input (Device) shaper curves
-np Don't create input (Device) grid position curves
-no Don't create output (PCS) shaper curves
-nc Don't put the input .ti3 data in the profile
-k zhxr Black Ink generation target: z = zero K,
h = 0.5 K, x = max K, r = ramp K (def.)
-k p stle stpo enpo enle shape
stle: K level at White 0.0 - 1.0
stpo: start point of transition Wh 0.0 - Bk 1.0
enpo: End point of transition Wh 0.0 - Bk 1.0
enle: K level at Black 0.0 - 1.0
shape: 1.0 = straight, 0.0-1.0 concave, 1.0-2.0 convex
-K parameters Same as -k, but target is K locus rather than K value itself
-l tlimit override total ink limit, 0 - 400% (default from .ti3)
-L klimit override black ink limit, 0 - 100% (default from .ti3)
-a lxXgsmGS Algorithm type override
l = Lab cLUT (def.), x = XYZ cLUT, X = display XYZ cLUT + matrix
g = gamma+matrix, s = shaper+matrix, m = matrix only,
G = single gamma+matrix, S = single shaper+matrix
-u If input profile, auto scale WP to allow extrapolation
-uc If input profile, clip cLUT values above WP
-U scale If input profile, scale media white point by scale
-R Restrict white <= 1.0, black and primaries to be +ve
-V demphasis Degree of dark region cLUT grid emphasis 1.0-4.0 (default 1.00 = none)
-f [illum] Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.:
M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp]
-i illum Choose illuminant for computation of CIE XYZ from spectral data & FWA:
A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp
-o observ Choose CIE Observer for spectral data:
1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
-r avgdev Average deviation of device+instrument readings as a percentage (default 0.50%)
-s src.icc Apply gamut mapping to output profile perceptual B2A table for given source space
-S src.icc Apply gamut mapping to output profile perceptual and saturation B2A table
-nP Use colormetric source gamut to make output profile perceptual table
-nS Use colormetric source gamut to make output profile saturation table
-g src.gam Use source image gamut as well for output profile gamut mapping
-p absprof,... Incorporate abstract profile(s) into output tables
-t intent Override gamut mapping intent for output profile perceptual table:
-T intent Override gamut mapping intent for output profile saturation table:
a - Absolute Colorimetric (in Jab) [ICC Absolute Colorimetric]
aw - Absolute Colorimetric (in Jab) with scaling to fit white point
aa - Absolute Appearance
r - White Point Matched Appearance [ICC Relative Colorimetric]
la - Luminance axis matched Appearance
p - Perceptual (Preferred) (Default) [ICC Perceptual]
pa - Perceptual Apperance
lp - Luminance Preserving Perceptual
ms - Saturation
s - Enhanced Saturation [ICC Saturation]
al - Absolute Colorimetric (Lab)
rl - White Point Matched Colorimetric (Lab)
-c viewcond set input viewing conditions for output profile CIECAM02 gamut mapping,
either an enumerated choice, or a parameter
-d viewcond set output viewing conditions for output profile CIECAM02 gamut mapping
either an enumerated choice, or a parameter
Also sets out of gamut clipping CAM space.
either an enumerated choice, or a series of parameters:value changes
pp - Practical Reflection Print (ISO-3664 P2)
pe - Print evaluation environment (CIE 116-1995)
pc - Critical print evaluation environment (ISO-3664 P1)
mt - Monitor in typical work environment
mb - Bright monitor in bright work environment
md - Monitor in darkened work environment
jm - Projector in dim environment
jd - Projector in dark environment
tv - Television/Film Studio
pcd - Photo CD - original scene outdoors
ob - Original scene - Bright Outdoors
cx - Cut Sheet Transparencies on a viewing box
-P Create gamut gammap_p.wrl and gammap_s.wrl diagostics
-O outputfile Override the default output filename.
inoutfile Base name for input.ti3/output.icc file
colprof -HELP (return code: 1)
Create ICC profile, Version 1.8.3
Author: Graeme W. Gill, licensed under the AGPL Version 3
Diagnostic: Unknown flag '-'
usage: colprof [-options] inoutfile
-v Verbose mode
-A manufacturer Manufacturer description string
-M model Model description string
-D description Profile Description string (Default "inoutfile")
-C copyright Copyright string
-Z tmnb Attributes: Transparency, Matte, Negative, BlackAndWhite
-Z prsa Default intent: Perceptual, Rel. Colorimetric, Saturation, Abs. Colorimetric
-q lmhu Quality - Low, Medium (def), High, Ultra
-b [lmhun] Low quality B2A table - or specific B2A quality or none for input device
-ni Don't create input (Device) shaper curves
-np Don't create input (Device) grid position curves
-no Don't create output (PCS) shaper curves
-nc Don't put the input .ti3 data in the profile
-k zhxr Black Ink generation target: z = zero K,
h = 0.5 K, x = max K, r = ramp K (def.)
-k p stle stpo enpo enle shape
stle: K level at White 0.0 - 1.0
stpo: start point of transition Wh 0.0 - Bk 1.0
enpo: End point of transition Wh 0.0 - Bk 1.0
enle: K level at Black 0.0 - 1.0
shape: 1.0 = straight, 0.0-1.0 concave, 1.0-2.0 convex
-K parameters Same as -k, but target is K locus rather than K value itself
-l tlimit override total ink limit, 0 - 400% (default from .ti3)
-L klimit override black ink limit, 0 - 100% (default from .ti3)
-a lxXgsmGS Algorithm type override
l = Lab cLUT (def.), x = XYZ cLUT, X = display XYZ cLUT + matrix
g = gamma+matrix, s = shaper+matrix, m = matrix only,
G = single gamma+matrix, S = single shaper+matrix
-u If input profile, auto scale WP to allow extrapolation
-uc If input profile, clip cLUT values above WP
-U scale If input profile, scale media white point by scale
-R Restrict white <= 1.0, black and primaries to be +ve
-V demphasis Degree of dark region cLUT grid emphasis 1.0-4.0 (default 1.00 = none)
-f [illum] Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.:
M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp]
-i illum Choose illuminant for computation of CIE XYZ from spectral data & FWA:
A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp
-o observ Choose CIE Observer for spectral data:
1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
-r avgdev Average deviation of device+instrument readings as a percentage (default 0.50%)
-s src.icc Apply gamut mapping to output profile perceptual B2A table for given source space
-S src.icc Apply gamut mapping to output profile perceptual and saturation B2A table
-nP Use colormetric source gamut to make output profile perceptual table
-nS Use colormetric source gamut to make output profile saturation table
-g src.gam Use source image gamut as well for output profile gamut mapping
-p absprof,... Incorporate abstract profile(s) into output tables
-t intent Override gamut mapping intent for output profile perceptual table:
-T intent Override gamut mapping intent for output profile saturation table:
a - Absolute Colorimetric (in Jab) [ICC Absolute Colorimetric]
aw - Absolute Colorimetric (in Jab) with scaling to fit white point
aa - Absolute Appearance
r - White Point Matched Appearance [ICC Relative Colorimetric]
la - Luminance axis matched Appearance
p - Perceptual (Preferred) (Default) [ICC Perceptual]
pa - Perceptual Apperance
lp - Luminance Preserving Perceptual
ms - Saturation
s - Enhanced Saturation [ICC Saturation]
al - Absolute Colorimetric (Lab)
rl - White Point Matched Colorimetric (Lab)
-c viewcond set input viewing conditions for output profile CIECAM02 gamut mapping,
either an enumerated choice, or a parameter
-d viewcond set output viewing conditions for output profile CIECAM02 gamut mapping
either an enumerated choice, or a parameter
Also sets out of gamut clipping CAM space.
either an enumerated choice, or a series of parameters:value changes
pp - Practical Reflection Print (ISO-3664 P2)
pe - Print evaluation environment (CIE 116-1995)
pc - Critical print evaluation environment (ISO-3664 P1)
mt - Monitor in typical work environment
mb - Bright monitor in bright work environment
md - Monitor in darkened work environment
jm - Projector in dim environment
jd - Projector in dark environment
tv - Television/Film Studio
pcd - Photo CD - original scene outdoors
ob - Original scene - Bright Outdoors
cx - Cut Sheet Transparencies on a viewing box
-P Create gamut gammap_p.wrl and gammap_s.wrl diagostics
-O outputfile Override the default output filename.
inoutfile Base name for input.ti3/output.icc file