Read Target Test Chart, Version 1.8.3 Author: Graeme W. Gill, licensed under the AGPL Version 3 usage: chartread [-options] outfile -v Verbose mode -c listno Set communication port from the following list (default 1) 1 = '/dev/ttyS0' 2 = '/dev/ttyS1' 3 = '/dev/ttyS10' 4 = '/dev/ttyS11' 5 = '/dev/ttyS12' 6 = '/dev/ttyS13' 7 = '/dev/ttyS14' 8 = '/dev/ttyS15' 9 = '/dev/ttyS16' 10 = '/dev/ttyS17' 11 = '/dev/ttyS18' 12 = '/dev/ttyS19' 13 = '/dev/ttyS2' 14 = '/dev/ttyS20' 15 = '/dev/ttyS21' 16 = '/dev/ttyS22' 17 = '/dev/ttyS23' 18 = '/dev/ttyS24' 19 = '/dev/ttyS25' 20 = '/dev/ttyS26' 21 = '/dev/ttyS27' 22 = '/dev/ttyS28' 23 = '/dev/ttyS29' 24 = '/dev/ttyS3' 25 = '/dev/ttyS30' 26 = '/dev/ttyS31' 27 = '/dev/ttyS4' 28 = '/dev/ttyS5' 29 = '/dev/ttyS6' 30 = '/dev/ttyS7' 31 = '/dev/ttyS8' 32 = '/dev/ttyS9' -t Use transmission measurement mode -d Use display measurement mode (white Y relative results) -y l|c Other: l = LCD, c = CRT -e Emissive for transparency on a light box -p Measure patch by patch rather than strip -x [lx] Take external values, either L*a*b* (-xl) or XYZ (-xx). -n Don't save spectral information (default saves spectral) -l Save CIE as D50 L*a*b* rather than XYZ -L Save CIE as D50 L*a*b* as well as XYZ -r Resume reading partly read chart -I file.cal Override calibration info from .ti2 in resulting .ti3 -F filter Set filter configuration (if aplicable): n None p Polarising filter 6 D65 u U.V. Cut -N Disable initial calibration of instrument if possible -B Disable auto bi-directional strip recognition -H Use high resolution spectrum mode (if available) -X file.ccmx Apply Colorimeter Correction Matrix -X file.ccss Use Colorimeter Calibration Spectral Samples for calibration -Q observ Choose CIE Observer for CCSS instrument: 1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 -T ratio Modify strip patch consistency tolerance by ratio -S Suppress wrong strip & unexpected value warnings -W n|h|x Override serial port flow control: n = none, h = HW, x = Xon/Xoff -D [level] Print debug diagnostics to stderr outfile Base name for input[ti2]/output[ti3] file

Read Target Test Chart, Version 1.8.3 Author: Graeme W. Gill, licensed under the AGPL Version 3 usage: chartread [-options] outfile -v Verbose mode -c listno Set communication port from the following list (default 1) 1 = '/dev/ttyS0' 2 = '/dev/ttyS1' 3 = '/dev/ttyS10' 4 = '/dev/ttyS11' 5 = '/dev/ttyS12' 6 = '/dev/ttyS13' 7 = '/dev/ttyS14' 8 = '/dev/ttyS15' 9 = '/dev/ttyS16' 10 = '/dev/ttyS17' 11 = '/dev/ttyS18' 12 = '/dev/ttyS19' 13 = '/dev/ttyS2' 14 = '/dev/ttyS20' 15 = '/dev/ttyS21' 16 = '/dev/ttyS22' 17 = '/dev/ttyS23' 18 = '/dev/ttyS24' 19 = '/dev/ttyS25' 20 = '/dev/ttyS26' 21 = '/dev/ttyS27' 22 = '/dev/ttyS28' 23 = '/dev/ttyS29' 24 = '/dev/ttyS3' 25 = '/dev/ttyS30' 26 = '/dev/ttyS31' 27 = '/dev/ttyS4' 28 = '/dev/ttyS5' 29 = '/dev/ttyS6' 30 = '/dev/ttyS7' 31 = '/dev/ttyS8' 32 = '/dev/ttyS9' -t Use transmission measurement mode -d Use display measurement mode (white Y relative results) -y l|c Other: l = LCD, c = CRT -e Emissive for transparency on a light box -p Measure patch by patch rather than strip -x [lx] Take external values, either L*a*b* (-xl) or XYZ (-xx). -n Don't save spectral information (default saves spectral) -l Save CIE as D50 L*a*b* rather than XYZ -L Save CIE as D50 L*a*b* as well as XYZ -r Resume reading partly read chart -I file.cal Override calibration info from .ti2 in resulting .ti3 -F filter Set filter configuration (if aplicable): n None p Polarising filter 6 D65 u U.V. Cut -N Disable initial calibration of instrument if possible -B Disable auto bi-directional strip recognition -H Use high resolution spectrum mode (if available) -X file.ccmx Apply Colorimeter Correction Matrix -X file.ccss Use Colorimeter Calibration Spectral Samples for calibration -Q observ Choose CIE Observer for CCSS instrument: 1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 -T ratio Modify strip patch consistency tolerance by ratio -S Suppress wrong strip & unexpected value warnings -W n|h|x Override serial port flow control: n = none, h = HW, x = Xon/Xoff -D [level] Print debug diagnostics to stderr outfile Base name for input[ti2]/output[ti3] file