Cdrecord-yelling-line-to-tell-frontends-to-use-it-like-version 2.01.01a03-dvd Wodim 1.1.11 Copyright (C) 2006 Cdrkit suite contributors Based on works from Joerg Schilling, Copyright (C) 1995-2006, J. Schilling

Usage: wodim [options] track1...trackn Options: -version print version information and exit dev=target SCSI target to use as CD/DVD-Recorder gracetime=# set the grace time before starting to write to #. timeout=# set the default SCSI command timeout to #. debug=#,-d Set to # or increment misc debug level kdebug=#,kd=# do Kernel debugging -verbose,-v increment general verbose level by one -Verbose,-V increment SCSI command transport verbose level by one -silent,-s do not print status of failed SCSI commands driver=name user supplied driver name, use with extreme care driveropts=opt a comma separated list of driver specific options -setdropts set driver specific options and exit -checkdrive check if a driver for the drive is present -prcap print drive capabilities for MMC compliant drives -inq do an inquiry for the drive and exit -scanbus scan the SCSI and IDE buses and exit -reset reset the SCSI bus with the cdrecorder (if possible) -abort send an abort sequence to the drive (may help if hung) -overburn allow to write more than the official size of a medium -ignsize ignore the known size of a medium (may cause problems) -useinfo use *.inf files to overwrite audio options. speed=# set speed of drive blank=type blank a CD-RW disc (see blank=help) -format format a CD-RW/DVD-RW/DVD+RW disc formattype=# select the format method for DVD+RW disc fs=# Set fifo size to # (0 to disable, default is 4 MB) ts=# set maximum transfer size for a single SCSI command -load load the disk and exit (works only with tray loader) -lock load and lock the disk and exit (works only with tray loader) -eject eject the disk after doing the work -dummy do everything with laser turned off -msinfo retrieve multi-session info for genisoimage -msifile=path run -msinfo and copy output to file -toc retrieve and print TOC/PMA data -atip retrieve and print ATIP data -multi generate a TOC that allows multi session In this case default track type is CD-ROM XA mode 2 form 1 - 2048 bytes -fix fixate a corrupt or unfixated disk (generate a TOC) -nofix do not fixate disk after writing tracks -waiti wait until input is available before opening SCSI -immed Try to use the SCSI IMMED flag with certain long lasting commands -force force to continue on some errors to allow blanking bad disks -tao Write disk in TAO mode. -dao Write disk in SAO mode. -sao Write disk in SAO mode. -raw Write disk in RAW mode. -raw96r Write disk in RAW/RAW96R mode. -raw96p Write disk in RAW/RAW96P mode. -raw16 Write disk in RAW/RAW16 mode. -clone Write disk in clone write mode. tsize=# Length of valid data in next track padsize=# Amount of padding for next track pregap=# Amount of pre-gap sectors before next track defpregap=# Amount of pre-gap sectors for all but track #1 mcn=text Set the media catalog number for this CD to 'text' isrc=text Set the ISRC number for the next track to 'text' index=list Set the index list for the next track to 'list' -text Write CD-Text from information from *.inf or *.cue files textfile=name Set the file with CD-Text data to 'name' cuefile=name Set the file with CDRWIN CUE data to 'name' -audio Subsequent tracks are CD-DA audio tracks -data Subsequent tracks are CD-ROM data mode 1 - 2048 bytes (default) -mode2 Subsequent tracks are CD-ROM data mode 2 - 2336 bytes -xa Subsequent tracks are CD-ROM XA mode 2 form 1 - 2048 bytes -xa1 Subsequent tracks are CD-ROM XA mode 2 form 1 - 2056 bytes -xa2 Subsequent tracks are CD-ROM XA mode 2 form 2 - 2324 bytes -xamix Subsequent tracks are CD-ROM XA mode 2 form 1/2 - 2332 bytes -cdi Subsequent tracks are CDI tracks -isosize Use iso9660 file system size for next data track -preemp Audio tracks are mastered with 50/15 microseconds preemphasis -nopreemp Audio tracks are mastered with no preemphasis (default) -copy Audio tracks have unlimited copy permission -nocopy Audio tracks may only be copied once for personal use (default) -scms Audio tracks will not have any copy permission at all -pad Pad data tracks with 15 zeroed sectors Pad audio tracks to a multiple of 2352 bytes -nopad Do not pad data tracks (default) -shorttrack Subsequent tracks may be non Red Book < 4 seconds if in SAO or RAW mode -noshorttrack Subsequent tracks must be >= 4 seconds -swab Audio data source is byte-swapped (little-endian/Intel) The type of the first track is used for the toc type. Currently only form 1 tracks are supported.