T-0.3.18 (BitTornado)

Usage: btlaunchmany.py <directory> <global options> <directory> - directory to look for .torrent files (semi-recursive) Arguments are: --max_uploads <arg> the maximum number of uploads to allow at once. (defaults to 7) --keepalive_interval <arg> number of seconds to pause between sending keepalives (defaults to 120.0) --download_slice_size <arg> How many bytes to query for per request. (defaults to 16384) --upload_unit_size <arg> when limiting upload rate, how many bytes to send at a time (defaults to 1460) --request_backlog <arg> maximum number of requests to keep in a single pipe at once. (defaults to 10) --max_message_length <arg> maximum length prefix encoding you'll accept over the wire - larger values get the connection dropped. (defaults to 8388608) --ip <arg> ip to report you have to the tracker. (defaults to '') --minport <arg> minimum port to listen on, counts up if unavailable (defaults to 10000) --maxport <arg> maximum port to listen on (defaults to 60000) --random_port <arg> whether to choose randomly inside the port range instead of counting up linearly (defaults to 1) --responsefile <arg> file the server response was stored in, alternative to url (defaults to '') --url <arg> url to get file from, alternative to responsefile (defaults to '') --crypto_allowed <arg> whether to allow the client to accept encrypted connections (defaults to 1) --crypto_only <arg> whether to only create or allow encrypted connections (defaults to 0) --crypto_stealth <arg> whether to prevent all non-encrypted connection attempts; will result in an effectively firewalled state on older trackers (defaults to 0) --selector_enabled <arg> whether to enable the file selector and fast resume function (defaults to 1) --expire_cache_data <arg> the number of days after which you wish to expire old cache data (0 = disabled) (defaults to 10) --priority <arg> a list of file priorities separated by commas, must be one per file, 0 = highest, 1 = normal, 2 = lowest, -1 = download disabled (defaults to '') --saveas <arg> local file name to save the file as, null indicates query user (defaults to '') --timeout <arg> time to wait between closing sockets which nothing has been received on (defaults to 300.0) --timeout_check_interval <arg> time to wait between checking if any connections have timed out (defaults to 60.0) --max_slice_length <arg> maximum length slice to send to peers, larger requests are ignored (defaults to 131072) --max_rate_period <arg> maximum amount of time to guess the current rate estimate represents (defaults to 20.0) --bind <arg> comma-separated list of ips/hostnames to bind to locally (defaults to '') --ipv6_enabled <arg> allow the client to connect to peers via IPv6 (defaults to 0) --ipv6_binds_v4 <arg> set if an IPv6 server socket won't also field IPv4 connections (defaults to 1) --upload_rate_fudge <arg> time equivalent of writing to kernel-level TCP buffer, for rate adjustment (defaults to 5.0) --tcp_ack_fudge <arg> how much TCP ACK download overhead to add to upload rate calculations (0 = disabled) (defaults to 0.03) --display_interval <arg> time between updates of displayed information (defaults to 0.5) --rerequest_interval <arg> time to wait between requesting more peers (defaults to 300) --min_peers <arg> minimum number of peers to not do rerequesting (defaults to 20) --http_timeout <arg> number of seconds to wait before assuming that an http connection has timed out (defaults to 60) --max_initiate <arg> number of peers at which to stop initiating new connections (defaults to 40) --check_hashes <arg> whether to check hashes on disk (defaults to 1) --max_upload_rate <arg> maximum kB/s to upload at (0 = no limit, -1 = automatic) (defaults to 0) --max_download_rate <arg> maximum kB/s to download at (0 = no limit) (defaults to 0) --alloc_type <arg> allocation type (may be normal, background, pre-allocate or sparse) (defaults to 'normal') --alloc_rate <arg> rate (in MiB/s) to allocate space at using background allocation (defaults to 2.0) --buffer_reads <arg> whether to buffer disk reads (defaults to 1) --write_buffer_size <arg> the maximum amount of space to use for buffering disk writes (in megabytes, 0 = disabled) (defaults to 4) --breakup_seed_bitfield <arg> sends an incomplete bitfield and then fills with have messages, in order to get around stupid ISP manipulation (defaults to 1) --snub_time <arg> seconds to wait for data to come in over a connection before assuming it's semi-permanently choked (defaults to 30.0) --spew <arg> whether to display diagnostic info to stdout (defaults to 0) --rarest_first_cutoff <arg> number of downloads at which to switch from random to rarest first (defaults to 2) --rarest_first_priority_cutoff <arg> the number of peers which need to have a piece before other partials take priority over rarest first (defaults to 5) --min_uploads <arg> the number of uploads to fill out to with extra optimistic unchokes (defaults to 4) --max_files_open <arg> the maximum number of files to keep open at a time, 0 means no limit (defaults to 50) --round_robin_period <arg> the number of seconds between the client's switching upload targets (defaults to 30) --super_seeder <arg> whether to use special upload-efficiency-maximizing routines (only for dedicated seeds) (defaults to 0) --security <arg> whether to enable extra security features intended to prevent abuse (defaults to 1) --max_connections <arg> the absolute maximum number of peers to connect with (0 = no limit) (defaults to 0) --auto_kick <arg> whether to allow the client to automatically kick/ban peers that send bad data (defaults to 1) --double_check <arg> whether to double-check data being written to the disk for errors (may increase CPU load) (defaults to 1) --triple_check <arg> whether to thoroughly check data being written to the disk (may slow disk access) (defaults to 0) --lock_files <arg> whether to lock files the client is working with (defaults to 1) --lock_while_reading <arg> whether to lock access to files being read (defaults to 0) --auto_flush <arg> minutes between automatic flushes to disk (0 = disabled) (defaults to 0) --dedicated_seed_id <arg> code to send to tracker identifying as a dedicated seed (defaults to '') --parse_dir_interval <arg> how often to rescan the torrent directory, in seconds (defaults to 60) --saveas_style <arg> How to name torrent downloads (1 = rename to torrent name, 2 = save under name in torrent, 3 = save in directory under torrent name) (defaults to 1) --display_path <arg> whether to display the full path or the torrent contents for each torrent (defaults to 1) --save_options <arg> whether to save the current options as the new default configuration (only for btlaunchmany.py) (defaults to 0)